| Type |
LOVSON Diesel Engine is SINGLE CYLINDER, vertical, totally enclosed
compression ignition, four stroke cycle, cold starting diesel
engine tested as per IS 11170-1985. |
|
| Cumbustion |
DIRECT INJECTION cumbustion takes place in a cavity on the top
of the Aluminum Alloy Piston in order to minimise power loss
usually occuring because of gas leakage & heat loss, resulting
in powerful performance, low fuel consumption & easy start. |
|
| Rotation |
Standard clockwise rotation when viewed from flywheel end, keeping Air & Exhaust toward left hand side. |
|
| Lubrication |
Engines internal moving parts are partially lubricated by SPLASH SYSTEM of lubrication. Crank Pin & C.R. Bearings are forced lubricated by plunger type lubricating Oil Pump. |
|
| Cooling |
Engine’s cooling is arranged by run through water supply. A radiator or Cooling tank can be arranged if required. |
|
| Balancing |
Engine is balanced with two balance weights bolted on crank shaft. Flywheel is balanced for longer life of moving parts. |
|
| Drive |
Standard power take off is from left hand side flywheel end
when viewed from Air & Exhaust side. |
|
| Fuel System |
Fuel is supplied to the fuel pump by gravity feed through wire mesh filter in fuel tank & efficient paper element filter in fuel filter. |
