Diesel Engines SL Series Little Giant LG Series SH Series SK / SKA Series SHD & DN Series SA, DNA & SDA Series General InformationTechnical SpecificationsType LOVSON Diesel Engine is SINGLE CYLINDER, vertical, totally enclosed compression ignition, four stroke cycle, cold starting diesel engine tested as per IS 11170-1985. SL SERIES engines are generally available with Tapper Roller Bearing fitted on crankshaft. There is an option of Bimetal bush bearings too.Cumbustion INDIRECT INJECTION : cumbustion takes place in an open cavity in the cyl head above the Piston.Rotation Standard clockwise rotation when observed from flywheel end, keeping Air & Exhaust on the left hand side.Lubrication In case of TAPPER ROLLER BEARING engine the engine’s internal moving parts are partially lubricated by SPLASH SYSTEM of lubrication. In case of Bimetal bush bearing, the main bush bearings are lubricated by force through a plunger type lubricating oil pump and other moving parts by Splash Lube System.Cooling Engine’s cooling is arranged by run through water supply. A Radiator or Cooling tank can be arranged if required.Drive Standard power take off is from left hand side flywheel end when viewed from Air & Exhaust side.Fuel System Fuel is supplied to the fuel pump by gravity feed through wire mesh filter in fuel tank & efficient paper element filter in fuel filter.